HOME        中文版
Add.: 1#, Renmin Rd., Huicun Town, Jiangdu, PRC.
Tel: +86-514-86375568
Fax: +86-514-86373703
E-mail: mail@solventdye.com
Daylight Fluorescent Pigments can be vastly applied for plastics, inks, paints, textile printing, poster colors, papers, stationery, toys, safety markers, sports and leisure goods etc.
ZQ Colors    ZQ-Fine Particles
Applications:
Nano-glo ZQ Fluorescent Pigments offer formaldehyde free, lower mold plate out, melt-in, best tinting strength, superior brightness, increased plastic compatibility, fade resistant and excellent heat stability in injection molded plastics when compared to other thermoplastic fluorescent pigments commercially available. The maximum recommended processing temperature is up to300°C.

Physical Properties & Chemical Nature:

Available Colors:

ZQ-11    Pink

ZQ-12    Cerise

ZQ-13    Red

ZQ-14    Red Orange

ZQ-15    Orange

ZQ-16    Orange Yellow

ZQ-17    Yellow

ZQ-18    Green

ZQ-19    Blue

ZQ-20    Lemon Yellow)

ZQ-21    Rose

ZQ-22    Violet

Product Forms:
Solid Dye Solution in a Thermoplastic Resin
Specific Gravity (Density): 1.2g/cm3
Average Particle Size: ≤10μm
Softening Point: ≥130℃
Decomposition Point: ≥300℃
Minimum Processing Temperature: 185℃

Use in Plastics:
Polyethylene (PE,HD/LD) +
Polypropylene (PP) +
Polystyrene (PS) +
Polycarbonate (PC) +/-
Polyyurethane (PU) +/-
Polyvinylchloride (PVC flexible) +/-
Polyamide (Nylon) +/-
Polyester +/-
Polymethylmethacrylate (PMMA) +/-
Acrylonitrile-butadiene-styrene (ABS) +/-
Remarks:
+ = Recommended
+/- = Recommended, but should be tested in individual resins

Important Notice:
Ⅰ. ZQ Pigments are essentially non-toxic and contain no constituent heavy metals, safe to be applied in finished product such as toys to comply with currently available international regulations (see note) on heavy metal concentrations.
Note:
1. US ASTM F963:96a (4,3,5) Standard consumer Safety Specification on Toy Safety.
2. EU European Standard on Safety of Toys, EN71part
Ⅱ. 1994(including amendment A1:2000)-Migration of Certain Elements.
Ⅲ. Certain metal ions are known to cause color changes and loss of brightness with fluorescent colorants. Studies have shown that plastic processing additives containing "free" zinc, magnesium, calcium and iron will cause deleterious color effects when used in a plastic resin system containing ZQ Pigment. If a metal containing additive must be used, it should be thoroughly tested to ensure the color stability of the ZQ Pigment.

Storage:
The product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with legal regulations.

Disclaimer:
All recommendations for use of our products, whether given by us in writing, verbally, or to be implied form the results of tests carried out by us are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore, The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. we warrant that our products are free from defects in accordance with and subject to our general conditions of supply.
HOME    |    INTRODUCTION    |    PRODUCTS    |    FACILITY    |    ORDER ONLINE    |    CONTACT    |    中文版
Copyright(C)2009, Nanochemitek (Yangzhou) Corp All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle