HOME        中文版
Add.: 1#, Renmin Rd., Huicun Town, Jiangdu, PRC.
Tel: +86-514-86375568
Fax: +86-514-86373703
E-mail: mail@solventdye.com
Daylight Fluorescent Pigments can be vastly applied for plastics, inks, paints, textile printing, poster colors, papers, stationery, toys, safety markers, sports and leisure goods etc.
GS Colors    GS-Uniquely Spheroiodal Particles
                       Fluorescent Pigment dispersions
Nano-Glo GS dispersions are based on a unique formaldehyde-free pigment technology. This product offers a sub-micron, high tinctorial strength, excellent dispersion stability, enhanced brightness, fluorescent pigment particle with superior light fastness properties. The GS dispersions are suspended in water and suitable for use in water based textile printing and pad dyeing owing to its outstanding characteristics, and can be applied also for non-textile applications, such as inks, plastics, paints, papers, poster color, stationery, special water base ink, leather, etc.

Physical Properties & Chemical Nature:

Available Colors:

GS-11    Red Orange

GS-12    Green

GS-13    Red

GS-14    Orange

GS-15    Lemon Yellow)

GS-16    Orange Yellow

GS-07    Cerise

GS-17    Pink

GS-27    Rose

GS-37    Rubine

GS-47    Violet

GS-28    Blue

Product Forms:
Aqueous Fluorescent Pigment Dispersion
Specific Gravity (Density): 1.0-1.1g/cm3
Average Particle Size: ≤0.5μm
Solid Content: 40-42% by weight
PH Value: 7.0-8.5

Features of GS Colors
1. Formaldehyde-Free:
The GS Dispersion is completely different from conventional fluorescent pigments dispersion and does not generate formaldehyde even though under severe heat conditions. The GS Dispersion, on the other hand, contains no formaldehyde, and is therefore a safe pigment dispersion.
2. Uitra Fine Particle Size:
The particle size of the GS Dispersion is below 1.0Ám. Accordingly, it causes no trouble such as clogging in screen mesh or plate cylinder and mottling in printing.
3. Superior Light fastness:
Conventional fluorescent pigment dispersions cannot provide a printed pattern of high quality enough to satisfy buyers' demands because of their poor light fastness. However GS Dispersion has a light fastness of rating 4 on the wool scale so that they may be used to produce a beautifully designed pattern.
4. Superior Resistance to Heat:
There is no discoloration by drying at about 204(~.This property allows rapid curing at higher temperatures than with conventional fluorescent pigments.
5. High Color Concentration:
The GS dispersions contain approximately 40-42% fluorescent pigment dispersed in water, and contain no binder, the GS dispersions are liquid products which offer easy in corporation into aqueous systems with minimal mixing.

The GS dispersions are essentially non-toxic with zero formaldehyde emission and contain no constituent heavy metals, safe to be applied in end products such as printed cloths, sports and leisure, etc.

The product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with legal regulations.

All recommendations for use of our products, whether given by us in writing, verbally, or to be implied form the results of tests carried out by us are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore, The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. we warrant that our products are free from defects in accordance with and subject to our general conditions of supply.
HOME    |    INTRODUCTION    |    PRODUCTS    |    FACILITY    |    ORDER ONLINE    |    CONTACT    |    中文版
Copyright(C)2009, Nanochemitek (Yangzhou) Corp All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle