HOME        中文版
Add.: 1#, Renmin Rd., Huicun Town, Jiangdu, PRC.
Tel: +86-514-86375568
Fax: +86-514-86373703
E-mail: mail@solventdye.com
Daylight Fluorescent Pigments can be vastly applied for plastics, inks, paints, textile printing, poster colors, papers, stationery, toys, safety markers, sports and leisure goods etc.
PS Colors    PS-Ultra Fine Particles
Applications:
Nano-glo PS Fluorescent Pigments possess better tinctorial strength, exceptional brightness, excellent heat stability with stronger solvent and bleeding resistance than conventional thermoset fluorescent pigments commercially available. They can be vastly applied to the organic solvent systems of non-polar and weak polar (i.e. aromatic hydrocarbons, acetate esters, fatty alcohols). They are used in such applications as non-polar gravure inks, PVC plastisols, paper coatings, PVC screen inks, crayons, etc.

Physical Properties & Chemical Nature:

Available Colors:

PS-10 Lemon Yellow

PS-11 Green

PS-12 Orange Yellow

PS-13 Orange

PS-14 Red Orange

PS-15 Red

PS-16 Cerise

PS-17 Pink

PS-18 Rose

PS-19 Blue

PS-20 White

PS-21 Violet

Product Forms:
Solid Dye Solution in a Thermoset Resin
Specific Gravity (Density): 1.34g/cm3
Average Particle Size: 3.0-5.0μm
Decomposition Point: 225°C
Oil Absorption: ≤50g/100g pigment

Important Notice:
Certain metal ions are known to cause color changes and loss of brightness with fluorescent colorants. Studies have shown that plastic processing additives containing "free" zinc, magnesium, calcium and iron will cause deleterious color effects when used in a plastic resin system containing PS Pigment. If a metal containing additive must be used, it should be thoroughly tested to ensure the color stability of the PS Pigment.

Toxicity:
PS Pigments are essentially non-toxic and contain no constituent heavy metals, safe to be applied in finished product such as graphic arts.

Storage:
The product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with legal regulations.

Disclaimer:
All recommendations for use of our products, whether given by us in writing, verbally, or to be implied form the results of tests carried out by us are based on the current state of our knowledge.
Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore, The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. we warrant that our products are free from defects in accordance with and subject to our general conditions of supply.
HOME    |    INTRODUCTION    |    PRODUCTS    |    FACILITY    |    ORDER ONLINE    |    CONTACT    |    中文版
Copyright(C)2009, Nanochemitek (Yangzhou) Corp All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle